Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 19/01/19 in all areas

  1. Finally!! after 7 months my Cat N NC750SA 2016 was united with me (wife said, my face was glowing bright). The delivery driver mistakenly started it as they are supposed to check on delivery, I quickly switched it off. His mistake shows the battery is not drained and the vehicle starts. As per peace of mind and in the process of resurrection i would intend to do the following bits to clear the debris and change the broken clutch cover. 1.Drain the oil first. 2.Remove the clutch cover and check for debris. 3.Remove any debris if found and give a liquid clean for minute debris (pl
    1 point
  2. Nothing you have done is electrical so none should be the problem. So look for wiring you may have disturbed or left unplugged, disconnected or worse...trapped! Engine earth lead? Any sensors that you may have disturbed, side stand switch....the kill switch? Wouldn't be the first time this has caught people out.
    1 point
  3. Hi All, 1.Drained the oil 2.Removed the clutch cover , found the broken metal bits, removed and cleaned with white sprint. 3.Removed the oil filter 4.Removed the sump cover. 5.Cleaned all the parts using white spirit and fitted back the sump cover with instant gasket. 6.Filled oil filter with a bit of oil. 7.Fitted the new clutch cover with instant gasket. 8.Filled the engine oil and checked for any leakages. Everything looks absolutely fine , no leaks and no issues. Switched on the ignition, all the lights came up , but the engine lig
    1 point
  4. Has the brake fluid been topped up anytime before changing the pads? Perhaps there is too much fluid in the master cylinder preventing the pistons from going right back. Andy.
    1 point
This leaderboard is set to London/GMT+01:00
×
×
  • Create New...