commuter 262 Posted May 21, 2017 Share Posted May 21, 2017 I have used automatic chain oilers on various bikes in the past and have found that my back wheel gets really dirty but my fuel consumption improves and the drive chain and sprockets last much longer. I suspect that the same would happen with an NC. does anyone have any experience of an automatic chain oiler on an NC? Oh the other advantage I found was that anything near the chain gets waterproofed and you don't get those huge globs of sticky grease collecting in the nooks and crannies around the final drive sprocket (maybe because i am a cheapscape and used old engine oil in the chain oiler.) Link to post
horobags 905 Posted May 21, 2017 Share Posted May 21, 2017 look up 'loobman' in the search button. Link to post
Spindizzy 7,109 Posted May 21, 2017 Share Posted May 21, 2017 15 minutes ago, horobags said: look up 'loobman' in the search button. +1 Loobman.Had mine on the NC since new. Cheap and works a treat. Link to post
commuter 262 Posted May 21, 2017 Author Share Posted May 21, 2017 19 minutes ago, horobags said: look up 'loobman' in the search button. tried that, showed me nowt. I dont think it works properly, tried chain lubrication too but that showed nothing at all. Link to post
CFB 4,601 Posted May 21, 2017 Share Posted May 21, 2017 15 minutes ago, shiggsy said: PDOiler is my choice. Me too. Just fitted one on my X. I rode the best part of 250 miles today and it's working well. A light coating of oil on the chain and no fling at all. Very happy. It should keep the new chain and sprockets in good order. 1 Link to post
Guest GeoffThai Posted May 21, 2017 Share Posted May 21, 2017 Tried a simple one but oiled the back wheel more than the chain. Then I fitted a Tutoro, well made and clever design, recommend it. Link to post
SteveThackery 3,090 Posted May 21, 2017 Share Posted May 21, 2017 2 hours ago, GeoffThai said: Tried a simple one but oiled the back wheel more than the chain. Then I fitted a Tutoro, well made and clever design, recommend it. Me too. Link to post
wendeg 95 Posted May 22, 2017 Share Posted May 22, 2017 Had scottoiler v system on Transalp and it worked so great. Always used engine oil and the chain looked and was as it had just been taken out of its packaging after 30,000 miles! Before that bought the basic kit from Tutoro and took it off after 2 days. Imo it was flimsy and not well constructed. I know others here reported good feedback. Yesterday spent morning fitting scottoiler e system on ncx 2016. Will report back with feedback after doing some miles. Link to post
roddy 845 Posted May 22, 2017 Share Posted May 22, 2017 Does the vacuum system not work on our bikes? Link to post
CFB 4,601 Posted May 22, 2017 Share Posted May 22, 2017 3 minutes ago, roddy said: Does the vacuum system not work on our bikes? Sorry, no, not on the 700's as there is no vacuum take off point. Unless you fancy drilling and tapping a hole in the engine! From 2016 there is a vacuum take off point though. The Scottoiler E system, is electronic but IMHO over complicated and expensive. £200 !! I might be slightly biased but the PD mini does exactly the same job at half the price. Link to post
Guest aldmannie Posted May 22, 2017 Share Posted May 22, 2017 I like the simplicity of the Tutoro Auto, no electrics, no vacuum, set and forget, just magic. Link to post
embee 7,288 Posted May 22, 2017 Share Posted May 22, 2017 (edited) +1 for the PD Oilers, with one condition. the system seems to work very well and mine has been reliable and convenient ........ but the integrated ones (i.e. not the mini with a separate reservoir) are a total PITA to refill, what a stupid pea brained idea that was. I see they now do a clear version so at least you can see what's in there (if you don't have it tucked away out of sight), but having to use a syringe and dip-tube gubbins to fill and check the level is not user friendly. Otherwise yes I'd recommend them. The mini with separate bottle is the way to go if you can fit it somewhere. Edited May 22, 2017 by embee 1 Link to post
SteveThackery 3,090 Posted May 22, 2017 Share Posted May 22, 2017 (edited) 5 hours ago, aldmannie said: I like the simplicity of the Tutoro Auto, no electrics, no vacuum, set and forget, just magic. Totally agree. It's an ingenious design and requires nothing other than that the bike is moving. One theoretical downside is that the oil is gravity fed so the feed rate depends on the oil viscosity*. Obviously warmer weather increases the flow rate, and the reverse in winter. However, in practice it's a non-issue. There is a flow rate adjuster, and I just give it another half turn for the winter.*This criticism applies to most other chain oilers. Only a few have a positive displacement pump. Edited May 22, 2017 by SteveThackery Link to post
CFB 4,601 Posted May 22, 2017 Share Posted May 22, 2017 10 hours ago, roddy said: Does the vacuum system not work on our bikes? Sorry, no, not on the 700's as there is no vacuum take off point. Unless you fancy drilling and tapping a hole in the engine! From 2016 there is a vacuum take off point though. The Scottoiler E system, is electronic but IMHO over complicated and expensive. £200 !! I might be slightly biased but the PD mini does exactly the same job at half the price. Link to post
Slowboy 20,409 Posted May 22, 2017 Share Posted May 22, 2017 On 21/05/2017 at 21:41, GeoffThai said: Tried a simple one but oiled the back wheel more than the chain. Then I fitted a Tutoro, well made and clever design, recommend it. Yup, had a tutorro automatic on mine for 28,000 mikes, good, reliable and simple piece of kit. Link to post
pjm 6,041 Posted May 22, 2017 Share Posted May 22, 2017 I had the tuturo on the Integra and found it quite tricky to get it right. It was very temperature dependent to get the viscosity/flow rate just right. I am going to give the Loobman a go on the AT and will let you know how I get on. 1 Link to post
shiggsy 529 Posted May 23, 2017 Share Posted May 23, 2017 (edited) On 22/05/2017 at 13:24, embee said: I see they now do a clear version Cool, I'd definitely prefer that. Wonder how long until my metal one wears out ? Edited May 23, 2017 by shiggsy Link to post
CFB 4,601 Posted May 23, 2017 Share Posted May 23, 2017 Both the PD oilers are not gravity fed, they work by pumping a specific amount of oil at a selected time interval. They are not affected by temperature or viscosity of the oil, as they always pump exactly the same quantity. The reservoir on the mini is also clear and has a long filling tube. I have mine fitted inside the top fairing cover, strapped to the ignition coils bracket. 1 Link to post
SteveThackery 3,090 Posted May 24, 2017 Share Posted May 24, 2017 5 hours ago, CFB said: Both the PD oilers are not gravity fed, they work by pumping a specific amount of oil at a selected time interval. They are not affected by temperature or viscosity of the oil, as they always pump exactly the same quantity. I think that is the best solution from an "engineering elegance" point of view. However, it does require more complexity. The best thing about the Tutoro is that it genuinely is totally autonomous, requiring no electrical or vacuum connection at all, nor any input from the rider. Link to post
CFB 4,601 Posted May 24, 2017 Share Posted May 24, 2017 8 hours ago, SteveThackery said: I think that is the best solution from an "engineering elegance" point of view. However, it does require more complexity. The best thing about the Tutoro is that it genuinely is totally autonomous, requiring no electrical or vacuum connection at all, nor any input from the rider. Very true Steve. The trouble is, I'm an engineer at heart so like that elegance. 🙂 If someone isn't confident with fitting stuff to their bike, then simple is best. 1 Link to post
embee 7,288 Posted May 24, 2017 Share Posted May 24, 2017 True about the Tutoro. However the PD Oiler needs only a live feed switched from the ignition (plus an earth obviously). I used the supply to the socket in the cubby (std on the Integra). Not exactly rocket science, but admittedly it's more than the Tutoro needs. Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now