Help needed-clutch

[giley 458]

Hi, i took my foot lever off yesterday to clean chain/front sprocket. I think i put it back on out of allingment and then moved bike. I now cant select gears! I have put everything back as it should be but still no gears well it does sort of but only 1n 2 and then not very well.

 

So anyone any ideas, have i mucked up syncronisation/allingment in gear box or is this a big coincidence? Anything else i can check?

 

Edit

2016 750x manual

Edited July 16, 2017 by giley

[djsb 491]

Maybe it's the tie rod nut adjustment or the rose joints are not positioned properly. I leave any further comment to someone with a manual bike.

[Guest machinman]

The shifter MUST have been put back in the wrong position.

I don't have a manual but IIRC their is a dot on the splined shaft that should correspond with the pinch bolt cut out on the foot shifter.

No need and I recommend you do not adjust on the tie rod.

Hope this sorts it, you haven't done any harm internally so don't worry.

Edited July 16, 2017 by machinman
Typo

[giley 458]

Yes i put it on wrong, but corrected it and still no gear change:-(

[Guest machinman]

Is it somehow fouling on the front sprocket cover??

[giley 458]

Umm good thought!

[giley 458]

Think all sorted, just took lever all to bits cleaned relubed and back on after a slow cuppa. Runs through gears on stand, raining niw so will test run tomo. Thanks