Jump to content
Sign in to follow this  
paulj

Scott Oiler v System Install

Recommended Posts

paulj    1
paulj

did some research on the scottoiler for my new nc750x...  figured out i can fit that......  having had a look over all looks simple part from 1 thing.

 

I have an issue which maybe simple....

 

On the pictures on the scottoiler install guide  https://www.scottoiler.com/kb/article/nc750-2016.html#vSystem  the rear wheel has the large nyloc nut on the drive side, so its undo the nutput the bracket on, put nut back on bobs your uncle.....

 

The issue i have on my new bike is that the Nyloc nut is on the non drive side.....   my assumption is that the the whole rear wheel spindle/axle will have to come out..... beyond my level of comfort.....  or fit the oil nib a different way !!!  or buy the dual sided applicator...

 

What if anything am i missing ?????

Share this post


Link to post
wendeg    34
wendeg

On previous bike i used dual injector so had one already. I would be tempted to buy dual injector rather than taking out the spindle. Or just wait until you need to take out the wheel for a tyre change or puncture repair😉

Share this post


Link to post
TheEnglishman    312
TheEnglishman

Just wrap a coat hanger wire around the pipe and bend it to fit.   I use some heat shrink at the end as it wears away.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×