Guest snowball Posted July 13, 2012 Share Posted July 13, 2012 Can anyone enlighten me as to the advantages or reasons for wavy discs over ordinary ones please, an old guy asked me when parked up and I couldn,t give him an answer. Thanks Dave... Link to post
poldark 1,512 Posted July 13, 2012 Share Posted July 13, 2012 They look pretty, but I think there's also claims that they dissipate heat better so less prone to brake fade, but I could be wrong! Link to post
Guest Blackbird Posted July 13, 2012 Share Posted July 13, 2012 They supposedly clear water better as well although in this case, the design was to enable Honda to cut both front and rear discs from a single sheet of metal. The rear disc fits inside the front disc. Link to post
Guest martroy Posted July 13, 2012 Share Posted July 13, 2012 As far as I'm aware, the wavy edges have no effect on the braking they're there just to look pretty , the holes in the disc are to clear the water. There might be a marginal weight loss by making the wavy but it's going to be pretty minimal on a single disc. Link to post
Guest Naana Posted July 13, 2012 Share Posted July 13, 2012 (edited) My partner used to work at Harris Performance, and he says that it's "something to do with heat dissipation" but also says they sold loads mostly because they look pretty. I like the cutting both discs from one sheet of metal, but surely you could do that with round ones too? Edited July 13, 2012 by Naana Link to post
Guest Blackbird Posted July 14, 2012 Share Posted July 14, 2012 I like the cutting both discs from one sheet of metal, but surely you could do that with round ones too? I think it was to do with optimizing the diameter. The rear disc would have to be smaller if it wasn't wavy cut. http://world.honda.com/NewMidConcept/chassis/page07.html Link to post
Guest martroy Posted July 14, 2012 Share Posted July 14, 2012 Hi Blackbird, that's a really intersting article you've found, not just the bit about the philosophy behind the brake discs but the rest of the bike design. Some of it is pure manufacturers bu....it but there are some very interesting bits...well worth a read during these dark dreary days. Link to post
Guest Kagan Posted July 15, 2012 Share Posted July 15, 2012 I just thought that should be related with heat transfer. it will be much better the disc has as much as surface .The wavy circumference is longer than round one.That is why the discs have lots of holes also Link to post
Rocker66 34,437 Posted July 15, 2012 Share Posted July 15, 2012 Actually drilled discs were first brought in to improve wet weather braking as early discs without holes were terrible in the wet. Believe me I used them. If I remember correctly drilled discs on production bikes were first introduced by BMW in the early 70s Link to post
Guest Kagan Posted July 15, 2012 Share Posted July 15, 2012 you are right. I have checked the info that I've heard, it seems heat transfer is secondary improving point but for being wavy, I still think it is related with heat transfer. another point could be to have better friction by help of interrupted surface. Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now