Jump to content
jelle1970

Chain needs replacing

Recommended Posts

jelle1970

Hello my chain is nearing the end of life. Just 20000 km with a tutoro chainoiler. This is the first chain. But disappointed about the lifetime of this chain. 

Share this post


Link to post
TheEnglishman

Nah - that's about right.  You might get more, you might get less.

  • Like 1
  • Thanks 1

Share this post


Link to post
blan

I'm on 11k miles with an PD Oiler the chain is always wet with oil and I'm seeing sprocket ware already, a slight hooking of the teeth, I'm expecting to get to 20k miles but not passed it. 20k is a good life for a chain set.

Share this post


Link to post
makman

My chain is gone.  Just failed MOT due to excessive movement on a chain that has done 5k....  I've had chains do over 24k as I clean and lube them (Sprint RS, FJ1200), but this one is just rubbish. Was apparently fitted new to the bike when I bought it 1 year ago, but must be a chocolate chain as it has tight/loose spots and although it looks to be in good condition, has gone to pot.  

 

Managed to get chain a bit tighter so it should pass MOT, but I'm very annoyed at having such rubbish on the bike.  The C&S look reasonable still, but I'll replace them along with the chain.  Had similar issues with brake pads from same place, gone in 2400 miles.  EBC Road Black pads.  Far too soft for such a heavy bike.  Hey ho!

 

Bought a DID ZX chain with Afam sprockets, will have them fitted next week.  Thankfully I due to how has panned out, I am not on the bike until Tuesday next week anyhow. So it works out for me anyhow.

Share this post


Link to post
Defender
1 hour ago, makman said:

My chain is gone.  Just failed MOT due to excessive movement on a chain that has done 5k....  I've had chains do over 24k as I clean and lube them (Sprint RS, FJ1200), but this one is just rubbish. Was apparently fitted new to the bike when I bought it 1 year ago, but must be a chocolate chain as it has tight/loose spots and although it looks to be in good condition, has gone to pot.  

 

Managed to get chain a bit tighter so it should pass MOT, but I'm very annoyed at having such rubbish on the bike.  The C&S look reasonable still, but I'll replace them along with the chain.  Had similar issues with brake pads from same place, gone in 2400 miles.  EBC Road Black pads.  Far too soft for such a heavy bike.  Hey ho!

 

Bought a DID ZX chain with Afam sprockets, will have them fitted next week.  Thankfully I due to how has panned out, I am not on the bike until Tuesday next week anyhow. So it works out for me anyhow.

Make sure they send you the right sprockets, as many suppliers use a list that has the rear sprocket list the same as the manual bike, but it's not!

  • Like 1

Share this post


Link to post
makman

Thanks. Yes, I was careful to check that this was specifically for the DCT model.  I'll double check when it is delivered as well.  

  • Like 1

Share this post


Link to post
Defender
44 minutes ago, makman said:

Thanks. Yes, I was careful to check that this was specifically for the DCT model.  I'll double check when it is delivered as well.  

I did that, but still took 3 goes to get it right, the list that most suppliers use lists a 43 tooth rear sprocket for the '700 DCT version rather than 39 teeth.

Oddly the 700 Integra is correct, so in future I will be using that when ordering again, although I may try a 17 tooth front like the '750's run.

 

  • Like 1

Share this post


Link to post
makman

Cheers for that.  Always good to make sure it is spot on.  I'm not sure the current C&S is correct seeing as how bad the wear has been etc....  I'll find out on Friday. new set delivered tomorrow and fitting at my friendly place on Friday.  I use the ramp there to sort my bike myself.  Easy with all the right tools and only costs me £25 for as long as I need. Owner is a long time friend.

  • Like 2

Share this post


Link to post
DelBoy
On 5/3/2018 at 20:32, jelle1970 said:

Hello my chain is nearing the end of life. Just 20000 km with a tutoro chainoiler. This is the first chain. But disappointed about the lifetime of this chain. 

You did well... The Tutoro has already paid for itself. The OEM chain is rubbish IMHO, If you replace with quality a Quality chain & Sprockets it will lats a long time with the Tutoro.

I atchually upgraded to a 525 chain, lasting really well and rarely needs adjusting (also have a Tutoro).

 

  • Like 1

Share this post


Link to post
DelBoy
39 minutes ago, DelBoy said:

You did well... The Tutoro has already paid for itself. The OEM chain is rubbish IMHO, If you replace with quality a Quality chain & Sprockets it will lats a long time with the Tutoro.

I atchually upgraded to a 525 chain, lasting really well and rarely needs adjusting (also have a Tutoro).

 

Gosh my Spilling is terraball....

  • Haha 1

Share this post


Link to post
DelBoy
On 5/3/2018 at 20:39, TheEnglishman said:

Nah - that's about right.  You might get more, you might get less.

20,000 km = 12,500 miles, I didn't even get that (Mind you I did not have the oiler then). 

a tad messy but they really do enhance chain life.

  • Like 1

Share this post


Link to post
Mike5100

I think they really are naff chains. By 12k Miles all my NC chains were shot. My Africa Twin is at 17k miles and chain is in great condition. Same maintenance regime

mike

  • Like 1

Share this post


Link to post
Tex

The NC remains a ‘budget’ (ie.cheap) bike. It’s equipped with ‘budget’ components. You can go through it and replace chains, tyres, brakes, suspension with better stuff, but you will then have spent the £10k that it would have cost if Honda had used that stuff from new.

 

Like Mike says, the Africa Twin has a much better quality chain, but that was included in the higher purchase price. :) 

  • Like 1

Share this post


Link to post
Rocker66
40 minutes ago, Tex said:

The NC remains a ‘budget’ (ie.cheap) bike. It’s equipped with ‘budget’ components. You can go through it and replace chains, tyres, brakes, suspension with better stuff, but you will then have spent the £10k that it would have cost if Honda had used that stuff from new.

 

Like Mike says, the Africa Twin has a much better quality chain, but that was included in the higher purchase price. :) 

Completely agree Tex. The difference in quality of the suspension between the NC and Crossrunner is really noticeable but then so is the price.

  • Like 2

Share this post


Link to post
makman

The correct size C&S for DCT were delivered with the 520ZX heavy duty gold/black DID chain.  Also the doodah for peening the rivet set.  Next day delivery for free.

Share this post


Link to post
matt28

Nothing unusual, OEM chain at NC is pretty rubbish.

Just replaced my one last week, at 9000 miles.

Used D.I.D X-Ring 520 VX2, with new JT sprockets as well, as difference in price was only £10.

To keep it going smooth and clean, installed Scottoiler eSystem V2.

After approx 200 miles done so far, new chain is noticeably quieter. 

  • Like 2

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×