maltpress 20 Posted October 9, 2018 Share Posted October 9, 2018 The front clip on the plastic chain guard on my NC750X seems loose and I think the chain guard is rattling a bit (although TBH I can't always hear it and it could just be engine noise... I'm not used to it yet!). I think the hooked over bit on the clip should go over the top of the guard and the straight up section should slot into the guard but I can't seem to wiggle it in properly and permanently. I've tried looking for pics online but it's not exactly a bit of the bike a lot of people share pictures of. Anyone experienced similar? Any ideas? I'm tempted to get a more solid aftermarket guard but aesthetic customisation is a rabbit hole my wife (and bank manager) probably won't want me tumbling down... Link to post
klrman 560 Posted October 9, 2018 Share Posted October 9, 2018 My 750X chain guard wobbles too. Not a failure of the guard, but a combination of value engineering and perhaps commendably an attempt to cut down on the proliferation of plastic. Or less diplomatically put, ...... not man enough for the job Link to post
maltpress 20 Posted October 9, 2018 Author Share Posted October 9, 2018 Earplugs and forget then? Link to post
klrman 560 Posted October 9, 2018 Share Posted October 9, 2018 1 minute ago, maltpress said: Earplugs and forget then? Just keep your eye on it, but yes, I wouldn't worry too much yet. Mine has done about 15000 miles up to now and is fine. So maybe it is man enough, but after a lifetime in railway engineering, I'm too much a "belt and braces" man. Link to post
maltpress 20 Posted October 9, 2018 Author Share Posted October 9, 2018 Thanks. It's just had a service at the Honda dealership I got it from (second hand, 8k miles) so I figure it's fine. I can always replace if I need to. Just needed reassurance - all a bit new to me right now. Link to post
Jeffprince 4,921 Posted October 9, 2018 Share Posted October 9, 2018 5 hours ago, maltpress said: Thanks. It's just had a service at the Honda dealership I got it from (second hand, 8k miles) so I figure it's fine. I can always replace if I need to. Just needed reassurance - all a bit new to me right now. Don't assume a service will result in everything being as it should. Quite a few examples of dealer errors or overlooking things in these threads, I'm afraid. 2 Link to post
Andy m 23,508 Posted October 9, 2018 Share Posted October 9, 2018 IIRC you are right that the hook and clip have been assembled incorrectly. Undo the bolts, do the clippy bit then put the bolts back. Andy Link to post
baben 11,703 Posted October 9, 2018 Share Posted October 9, 2018 Out of interest, which dealer? Link to post
maltpress 20 Posted October 10, 2018 Author Share Posted October 10, 2018 John Banks Honda, Bury St Edmunds. 1 Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now