Jump to content
wjvh

NC700S oe tool kit

Recommended Posts

wjvh

Hi, my 3-owner NC700S did not come with any of the original Honda tools. Does anyone have a list of what’s included with the oe spec tool kit, thanks, Will

Share this post


Link to post
DaveM59

There is a double ended screwdriver, 10, 13, 15 and 17mm spanners, a plug spanner and a spanner for the front axle nut with an extension bar and 2 allen keys (4mm and 6mm?) to suit the bodywork socket screws and a fuse extractor clip.

You can usually buy complete kits on that auction site fairly cheaply.

When travelling further than a commute to work I always carry a larger bag and include a bottle of radweld, tyre plug kit, air pump and a small selection of fuses, cable ties, connectors etc and a better quality set of ring spanners from 10mm to 17mm.

  • Like 2

Share this post


Link to post
Tonyj

You can get them on the net or a local dealer. 

Share this post


Link to post
wjvh

Thanks guys. The ones on the web are about £25 but I’ve got that many tools in triplicate I can simply put together my own kit so the oe kit list is most helpful. Likely to add a couple of things I find useful too, cable ties, tape, pliers, etc. (Realise that sounds like a torture kit), and a puncture kit for the longer rides. Fortunately my other bike is a Honda too (CX500EC) so I can pretty much use one tool kit for both bikes. Thanks, Will

  • Like 1

Share this post


Link to post
Mr Toad
14 hours ago, wjvh said:

Thanks guys. The ones on the web are about £25 but I’ve got that many tools in triplicate I can simply put together my own kit so the oe kit list is most helpful. Likely to add a couple of things I find useful too, cable ties, tape, pliers, etc. (Realise that sounds like a torture kit), and a puncture kit for the longer rides. Fortunately my other bike is a Honda too (CX500EC) so I can pretty much use one tool kit for both bikes. Thanks, Will

 

One of the first things I do is remove the OEM toolkit and replace it with one made up from decent tools. These days though there's not a lot you can fix on a modern bike at the side of the road, I'd just call my breakdown service and leave the tool kit where it is. :) 

  • Like 2

Share this post


Link to post
Steel Horse UK

The NC700SA Tool kit consists of the following:

 

Spark plug wrench

● 8 × 12 mm Open end wrench

● 10 × 14 mm Open end wrench

● 12 × 14 mm Open end wrench

● Standard/Phillips screwdriver

● Screwdriver grip

● Extension bar

● 5 mm Hex wrench

● 22 mm Box end wrench

● 27 mm Box end wrench

● Helmet set wire

● Fuse puller

 

 

See page 64 of the owners manual.

Hope that helps ....

  • Like 3

Share this post


Link to post
embee

I made a small modification to the box-end wrenches (ring spanners) to be able to join them together and make them actually usable for undoing the rear wheel spindle.

 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×