Jump to content
CWG

Swingarm

Recommended Posts

CWG

Hi 

I have a 2015 S and the swing arm has started to rust at the ends. I will take it off and have it powder coated but don’t want any down time so buying a spare from flea bay. I saw a suggestion somewhere on here about having two and swapping out each year at winter service and think it’s a good idea. 

 

Is is there any difference in the swing arm in S and X models and 2015 and later models?

 

cheers

 

martin

Share this post


Link to post
Tonyj

Said in my best dealer voice “ theyalldothatmate”

  • Haha 2

Share this post


Link to post
wingrider.steve
1 hour ago, CWG said:

Is is there any difference in the swing arm in S and X models and 2015 and later models?

I've had a look through the parts fiches and it looks like all the NC750 "s" and NC750 "x" models from 2014 onwards use the same swingarm.

  • Thanks 1

Share this post


Link to post
CWG
1 hour ago, wingrider.steve said:

I've had a look through the parts fiches and it looks like all the NC750 "s" and NC750 "x" models from 2014 onwards use the same swingarm.

Thank you!

Share this post


Link to post
Tonyj

Both mine chipped and went off where the adjuster met the box section. Touched up the first , can’t be bothered with the second:0)

Share this post


Link to post
trisaki
1 hour ago, wingrider.steve said:

Or you could always do what I did:-

 

http://www.nc700.co.uk/index.php?/topic/14559-new-accessory/&

Any problems  since fitting  , if you haven't got a dct version  I assume you end up having  the handbrake  caliper mounting  to do something with 

Share this post


Link to post
wingrider.steve
9 hours ago, trisaki said:

Any problems  since fitting  , if you haven't got a dct version  I assume you end up having  the handbrake  caliper mounting  to do something with 

No problems at all and DCT or non-DCT isn't an issue as the handbrake caliper mounting is actually part of the rear caliper bracket which is separate to the swingarm.

Share this post


Link to post
rjp996

Im with Steve - ive been on the lookout for an Intgra swing arm for some time. - I end up painting my current swingarm every time I take it off to change the chain (so long as the weather is warm ;-)

Share this post


Link to post
CWG
15 hours ago, trisaki said:

Any problems  since fitting  , if you haven't got a dct version  I assume you end up having  the handbrake  caliper mounting  to do something with 

 

Words fail me.  That's the best thing/idea I've ever seen!

Share this post


Link to post
makman

I painted mine with Rustoleum yesterday....  Will take it apart one day when life slows down enough and rub, seal, prime and paint it properly.  I've slathered the inside with ACF50 grease though, so it is protected from the inside out.  It is a pain and it would be good for Honda to use materials that don't just corrode in these conditions for AWB's.  Need to wash the bike at some point when I finally get some time.

Share this post


Link to post
giley

Glad I'm not the only one with a rusty arm ;-) Price of a new alloy 1200

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×