CWG 31 Posted February 11, 2019 Share Posted February 11, 2019 Hi I have a 2015 S and the swing arm has started to rust at the ends. I will take it off and have it powder coated but don’t want any down time so buying a spare from flea bay. I saw a suggestion somewhere on here about having two and swapping out each year at winter service and think it’s a good idea. Is is there any difference in the swing arm in S and X models and 2015 and later models? cheers martin Link to post
Tonyj 6,907 Posted February 11, 2019 Share Posted February 11, 2019 Said in my best dealer voice “ theyalldothatmate” 2 Link to post
wingrider.steve 960 Posted February 11, 2019 Share Posted February 11, 2019 1 hour ago, CWG said: Is is there any difference in the swing arm in S and X models and 2015 and later models? I've had a look through the parts fiches and it looks like all the NC750 "s" and NC750 "x" models from 2014 onwards use the same swingarm. 1 Link to post
CWG 31 Posted February 11, 2019 Author Share Posted February 11, 2019 1 hour ago, wingrider.steve said: I've had a look through the parts fiches and it looks like all the NC750 "s" and NC750 "x" models from 2014 onwards use the same swingarm. Thank you! Link to post
Tonyj 6,907 Posted February 11, 2019 Share Posted February 11, 2019 Both mine chipped and went off where the adjuster met the box section. Touched up the first , can’t be bothered with the second:0) Link to post
wingrider.steve 960 Posted February 11, 2019 Share Posted February 11, 2019 Or you could always do what I did:- http://www.nc700.co.uk/index.php?/topic/14559-new-accessory/& Link to post
trisaki 2,029 Posted February 11, 2019 Share Posted February 11, 2019 1 hour ago, wingrider.steve said: Or you could always do what I did:- http://www.nc700.co.uk/index.php?/topic/14559-new-accessory/& Any problems since fitting , if you haven't got a dct version I assume you end up having the handbrake caliper mounting to do something with Link to post
wingrider.steve 960 Posted February 12, 2019 Share Posted February 12, 2019 9 hours ago, trisaki said: Any problems since fitting , if you haven't got a dct version I assume you end up having the handbrake caliper mounting to do something with No problems at all and DCT or non-DCT isn't an issue as the handbrake caliper mounting is actually part of the rear caliper bracket which is separate to the swingarm. Link to post
rjp996 1,091 Posted February 12, 2019 Share Posted February 12, 2019 Im with Steve - ive been on the lookout for an Intgra swing arm for some time. - I end up painting my current swingarm every time I take it off to change the chain (so long as the weather is warm ;-) Link to post
CWG 31 Posted February 12, 2019 Author Share Posted February 12, 2019 15 hours ago, trisaki said: Any problems since fitting , if you haven't got a dct version I assume you end up having the handbrake caliper mounting to do something with Words fail me. That's the best thing/idea I've ever seen! Link to post
makman 975 Posted February 13, 2019 Share Posted February 13, 2019 I painted mine with Rustoleum yesterday.... Will take it apart one day when life slows down enough and rub, seal, prime and paint it properly. I've slathered the inside with ACF50 grease though, so it is protected from the inside out. It is a pain and it would be good for Honda to use materials that don't just corrode in these conditions for AWB's. Need to wash the bike at some point when I finally get some time. Link to post
giley 458 Posted February 13, 2019 Share Posted February 13, 2019 Glad I'm not the only one with a rusty arm ;-) Price of a new alloy 1200 Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now