mb1735 0 Posted January 22, 2020 Share Posted January 22, 2020 (edited) Just bought an nc700s and want to use with my existing rear stand but I can't find where to fit the paddock bobbins. Any suggestions. Edited January 22, 2020 by mb1735 Link to post
Slowboy 20,426 Posted January 22, 2020 Share Posted January 22, 2020 (edited) I found it was easier to use the type that have a "U" shaped cup that fits under the swing arm, but M&P or someone might make adaptors. or you can get them from here (the NC700 part is the same as an NC750) https://www.bikefarmmv.com/epages/79512538.sf/en_GB/?ObjectID=41363367&ViewAction=FacetedSearchProducts&SearchString=Nc750+rear+bobbins Edited January 22, 2020 by slowboy Link to post
DCTPaul 629 Posted January 22, 2020 Share Posted January 22, 2020 R&G will take your money... They do a pair of bracket that attaches to the rear axle... bout £65... Link to post
rjp996 1,091 Posted January 22, 2020 Share Posted January 22, 2020 ive been thinking of drilling a hole in the swingarm and having a nut welded on each side to allow for bobbins on the swing arm so I can still remove the wheel etc. project I may get around to in the summer when I next take the swingarm off to re paint 1 Link to post
Grumpy old man 4,673 Posted January 22, 2020 Share Posted January 22, 2020 2 hours ago, rjp996 said: ive been thinking of drilling a hole in the swingarm and having a nut welded on each side to allow for bobbins on the swing arm so I can still remove the wheel etc. project I may get around to in the summer when I next take the swingarm off to re paint Am I missing the point? Why not fit a centre stand? 4 1 Link to post
Exceledsteve 2,191 Posted January 22, 2020 Share Posted January 22, 2020 I agree... you can take the swing arm off as well as the wheel when it's on the centre stand. 1 Link to post
outrunner 4,457 Posted January 22, 2020 Share Posted January 22, 2020 +1 centre stands rule. Andy. 1 Link to post
JONO49 201 Posted January 25, 2020 Share Posted January 25, 2020 I negotiated a centre stand in with the deal with my bike at cost with free fitting, I haven't had a bike without a centrestand for many years, Paddock stands are a hassle on your own! Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now