robskinn 0 Posted February 25, 2021 Share Posted February 25, 2021 (edited) After starting the engine and running the bike for 15 minutes or so, the power to the instrument panel cuts out intermittently then comes on again. It does this continually, but if I leave the bike for a while to cool down it behaves normally until the engine has been running for a while. I've ruled out a problem with the battery, checked all the fuses and cleaned out all of the connections to the instrument panel. With my limited knowledge of electrical issues I've 'possibly' narrowed it down to; Rectifier. Alternator. Earth connections. Faulty instrument panel problem. Faulty wiring. Any help would be most appreciated! Edited February 25, 2021 by robskinn Proofed Link to post
Slowboy 20,430 Posted February 25, 2021 Share Posted February 25, 2021 Reply’s in reg/rect thread. 😁 Link to post
Graham 3,162 Posted February 25, 2021 Share Posted February 25, 2021 (edited) That's exactly what my 2014 X did before the main fuse above the starter relay melted to it. I had a battery that was starting to die, which amplified the situation. Edited February 25, 2021 by Graham Link to post
kayz1 2,928 Posted February 25, 2021 Share Posted February 25, 2021 Also one chap had a problem with the instrument panel plug/socket, one of the pins had been pushed out so was not making contact correctly. Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now