a long electrical story with any advice sought
Hi I had stripped the body panels off my 700x to replace a front cowl and fairing stay that was damaged. prior to starting the work the bike was running fine and the battery appeared quite healthy turning the bike over and running everything fine. I took the battery out of the bike before commencing work about a week ago when I commenced the work. During stripping the panels I had to break some of the snap connectors, the indicators ,headlight, instrument dial and take the P6 spare one out of t
Got started this morning doing the checks, checked the main fuse, fine. continued down the line to the ignition switch and disconnected the connection below the ignition switch to get a reading, no reading on looking further the female part of the connection was so corroded it turned to dust when I gave it a good poke, ah that's not so good. I disconnected the battery and stripped the connection fitting a new 6.3mm connector that I had in the garage. connected the battery back up turned the igni
