Gear Box

[Guest Griffin2]

I have just bought a new NC750XA in manual, since the 300 mile mark I've had three occasions when the bike has jumped out of gear(despite being very careful about placement). Has anyone else had this problem, it's got to the point where I am now just bimbling through the gears to avoid a problem. What's the view on this? 

[wendeg 95]

I would suggest to give it some time to bed in.

 

On my XA during the first 500 miles or so, if I had to decelerate quickly, the bike would not downshift. It would show -- on the display and I would feel that no gear was selected. Now the problem has gone away

[Rocker66 34,466]

My bike is 3 wekks old having done just over a thousand miles and I have had no problems of this sort. I would reccomend that you have your dealer check it out

[trisaki 2,029]

Make sure you have some slack in your clutch lever also the right amount of slack in the drive chain rough guide about half to three quarters of an inch when you  sit on it  and check engine oil may have too much in it 

[RF52 0]

Old post, but thanks trisaki!