SteveM 706 Posted August 15, 2017 Share Posted August 15, 2017 Having not used it for 5 days came to the bike yesterday and the indicators are not working. The indicator switch and hazard switch seem to be working (just a feeling on them) but nothing on the bulbs. The green arrows also don't come on, on the instrument panel. Is this a fuse or all 4 bulbs gone? Many Thanks in advance Link to post
wingrider.steve 961 Posted August 15, 2017 Share Posted August 15, 2017 The fuse is the first thing to check, from memory it's the one in the fuse box marked "Clock/Turn" Link to post
Bigglesaircraft 293 Posted August 15, 2017 Share Posted August 15, 2017 It's more than likely a fuse but a bulb blowing may have caused it as sometimes there can be a surge of current/voltage as the bulb packs up causing the fuse to blow. Link to post
fred_jb 10,265 Posted August 15, 2017 Share Posted August 15, 2017 When this fuse blew on my 750X I also lost the speedo display and the odometer stopped counting the miles until I replaced the fuse. Link to post
SteveM 706 Posted August 15, 2017 Author Share Posted August 15, 2017 1 hour ago, wingrider.steve said: The fuse is the first thing to check, from memory it's the one in the fuse box marked "Clock/Turn" Checked all fuses and changed that just to make sure hasn't worked. Link to post
SteveM 706 Posted August 15, 2017 Author Share Posted August 15, 2017 6 minutes ago, fred_jb said: When this fuse blew on my 750X I also lost the speedo display and the odometer stopped counting the miles until I replaced the fuse. Don't know if it makes a difference but mines a high millage 58k 700X DCT. My miles are still working on my dash. Everything else still works. Link to post
fred_jb 10,265 Posted August 15, 2017 Share Posted August 15, 2017 (edited) If it's not the fuse or the switchgear then it could be bad news. I could be thinking of an other bike, which is entirely possible as I've had a few since my NC, but I believe there is no indicator relay as such on the NC - I think the flasher circuitry is built in to the instrument panel. Edited August 15, 2017 by fred_jb Link to post
Tex 36,817 Posted August 15, 2017 Share Posted August 15, 2017 I'm in the dark about this (groan ) but a quick Google search turned up.. http://nc700.blogspot.co.uk/2012/12/led-flasher-relay.html I hope that helps. Link to post
fred_jb 10,265 Posted August 15, 2017 Share Posted August 15, 2017 Good find Tex. Hopefully that means it just needs a new flasher relay, so sorry if I have caused the OP any worries about needing a new instrument panel. I know with one of my bikes I was researching replacing the indicator bulbs with LEDs but didn't want to use the messy and power wasting expedient of fitting resistors in parallel with the LEDs to take the same power and keep the flasher circuitry happy. Instead I wanted to fit an LED compatible flasher relay until I found that there was no separate relay on the bike - maybe it was the Versys. 1 Link to post
SteveM 706 Posted August 15, 2017 Author Share Posted August 15, 2017 Update. They came on, on the way home. Sometimes fine flicker rate sometimes a lot faster. Is this the relay on it's way out. Where can I find this and does anyone have the part number please. Link to post
embee 7,288 Posted August 15, 2017 Share Posted August 15, 2017 The relays are designed to flash at a fast rate when a lamp has failed (it lets you know something is wrong). Sounds like you have intermittent poor contacts somewhere, my bet is on a connector (usually is). Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now