nc750xuk 91 Posted October 3, 2017 Share Posted October 3, 2017 Morning all, i dont have my owners manual to hand so thought id ask on here On the way to work this morning i noticed my front headlight dipped beam and sidelight wernt working. I still have my tail light and high beam working correctly The bulb is fine so is there a specific fuse that feeds dipped beam and sidelight that may have blown? 2014 nc750x Thanks Link to post
paulx11 37 Posted October 3, 2017 Share Posted October 3, 2017 Hi, It sounds like the bulb to me - there are 2 filaments in it - 1 for dipped and 1 for high beam. Sounds like the dipped filament has gone. Link to post
DaveM59 1,605 Posted October 3, 2017 Share Posted October 3, 2017 Seems odd the rear tail is working but not the front as they are on the same circuit and fuse. I would suspect a connector somewhere at the front with a green pin or two or a dud relay but the side light failure assuming that you have also checked the bulb, would suggest a connector. Link to post
embee 7,288 Posted October 3, 2017 Share Posted October 3, 2017 Very possibly a connector issue. First one to check would be the one from the left switch cluster, it's somewhere near there in the left fairing (it is on my integra, I guess the X will be similar). I haven't looked at the wiring diag to see why the dip and sidelight should be linked this way, but if the lamps are OK that would be my next step. Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now