Rocker66 34,518 Posted August 16, 2012 Share Posted August 16, 2012 (edited) Has anyone removed the riders seat? If so how difficult was it to do? Any help appreciated I have had a quick look and there seems to be 2X 10mm bolts at the rear of the seat. Does anyone know if there are any more? Edited August 16, 2012 by Rocker66 Link to post
Guest Lockon2 Posted August 16, 2012 Share Posted August 16, 2012 Hi Rocker66 Yep just undo the two 10 mm bolts and it just slides back and off - dead easy. Be safe Link to post
Rocker66 34,518 Posted August 16, 2012 Author Share Posted August 16, 2012 Thanks for that Link to post
Guest Gugavfx Posted August 16, 2012 Share Posted August 16, 2012 It's just that (2 bolts), very easy. Link to post
Rev Ken 6,347 Posted August 16, 2012 Share Posted August 16, 2012 It's just that (2 bolts), very easy. 2 bolts and all that falls off! Link to post
Guest lancer58 Posted August 16, 2012 Share Posted August 16, 2012 Hi Guru. Are you planning to replace the seat or fit a gel or something. let us know how you get on. Link to post
Rocker66 34,518 Posted August 16, 2012 Author Share Posted August 16, 2012 I have had a quote for having the seat lowered and a gel pad inserted Link to post
Guest navygator66 Posted August 16, 2012 Share Posted August 16, 2012 Hello, how did you remove the cover? You have remedied the service manual? Link to post
Rocker66 34,518 Posted August 17, 2012 Author Share Posted August 17, 2012 I have not removed the cover. By getting a quote I meant I have asked a seat specalist the cost of having the work done. 1 Link to post
ddazzler64 16 Posted October 15, 2012 Share Posted October 15, 2012 let me know how much and where, i have learnt that numb bum is not nice on longer trips and could do with something soft to sit on - poor old sod that i am Link to post
ddazzler64 16 Posted October 15, 2012 Share Posted October 15, 2012 DAvid, why is your bike in bits? Link to post
Guest Gugavfx Posted October 16, 2012 Share Posted October 16, 2012 I fitted a garage door opener in the NC. It works by pressing the High Beam Lights . When I press it near the door it opens, on the road if i choose the the HB Lights, it works for 3 seconds and then stops, keeping the HB. The bike in bits was to pass the cables between the H4 lamp and the battery hole, where the box with the garage remote and the circuit to cut power after 3 seconds are. 1 Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now