SEAT REMOVAL

[Rocker66 34,527]

Has anyone removed the riders seat? If so how difficult was it to do?

Any help appreciated

I have had a quick look and there seems to be 2X 10mm bolts at the rear of the seat. Does anyone know if there are any more?

Edited August 16, 2012 by Rocker66

[Guest Lockon2]

Hi Rocker66

Yep just undo the two 10 mm bolts and it just slides back and off - dead easy.

Be safe

[Rocker66 34,527]

Thanks for that

[Guest Gugavfx]

It's just that (2 bolts), very easy.

[Rev Ken 6,347]

It's just that (2 bolts), very easy.

2 bolts and all that falls off!

[Guest lancer58]

Hi Guru. Are you planning to replace the seat or fit a gel or something. let us know how you get on.

[Rocker66 34,527]

I have had a quote for having the seat lowered and a gel pad inserted

[Guest navygator66]

Hello, how did you remove the cover? You have remedied the service manual?

[Rocker66 34,527]

I have not removed the cover. By getting a quote I meant I have asked a seat specalist the cost of having the work done.

[ddazzler64 16]

let me know how much and where, i have learnt that numb bum is not nice on longer trips and could do with something soft to sit on - poor old sod that i am

[ddazzler64 16]

DAvid, why is your bike in bits?

[Guest Gugavfx]

I fitted a garage door opener in the NC. It works by pressing the High Beam Lights . When I press it near the door it opens, on the road if i choose the the HB Lights, it works for 3 seconds and then stops, keeping the HB.

The bike in bits was to pass the cables between the H4 lamp and the battery hole, where the box with the garage remote and the circuit to cut power after 3 seconds are.