Guest jakeyboy2506 Posted May 28, 2019 Share Posted May 28, 2019 Can anyone help. I lowered my NC750X by 40mm but now the side stand is too long. If the side stand switch is removed to allow for an after market adjustable side stand, can the two wires be connected to bypass the switch? Will this have any affect with the dct gear box selector switch or do I need to do something else? Thanks in advance Link to post
wendeg 95 Posted May 29, 2019 Share Posted May 29, 2019 Why buy aftermarket when you can buy the sidestand for the 750s? 1 Link to post
Bessdogs 27 Posted May 29, 2019 Share Posted May 29, 2019 Remove switch swop side stand refit switch it’s only held on with a 8mm bolt Link to post
Guest jakeyboy2506 Posted May 29, 2019 Share Posted May 29, 2019 Thanks Guys The switch is damaged and will need replaced - will cutting off the old switch and joining the the two wires that that run into it let the bike go into gear and ride as normal? Link to post
embee 7,288 Posted May 29, 2019 Share Posted May 29, 2019 (edited) Yes it will, the systems will think the sidestand is up if the wires are joined. It will also allow you to engage gear and ride off with the stand down. The switches themselves are common on a gazillion Honda models. The thing which varies is the wire length and any clips etc. You can find sidestand switches on the auction site for a few ££, try to guess how long the wires are and get something which looks about right (or longer preferably). It's easy to hide extra wire. At worst you can extend the wires (or shorten come to that), keep joins as near the plug as you can and cover with heat-shrink. I'd go with the suggestions from others, either use an S/Integra sidestand or get the X one shortened. I'm sure someone could tell you what length it needs to be. Edited May 29, 2019 by embee Link to post
Guest jakeyboy2506 Posted May 29, 2019 Share Posted May 29, 2019 Thanks for all the information and suggestions - mutch appreciated Link to post
Davidogilvie 3 Posted September 3, 2021 Share Posted September 3, 2021 Id like to know where to get a side stand for 750s as its shorter than the x...my bike has been lowerd by 30mm. Link to post
Rocker66 34,370 Posted September 3, 2021 Share Posted September 3, 2021 6 minutes ago, Davidogilvie said: Id like to know where to get a side stand for 750s as its shorter than the x...my bike has been lowerd by 30mm. Either look on line for a used one or if you want new any Honda dealer should be able to supply one. Link to post
Davidogilvie 3 Posted September 3, 2021 Share Posted September 3, 2021 11 hours ago, Rocker66 said: Either look on line for a used one or if you want new any Honda dealer should be able to supply one. I have one on order but will take few days...was hoping to still get out on it until new one arrives. 1 Link to post
Davidogilvie 3 Posted September 22, 2021 Share Posted September 22, 2021 On 03/09/2021 at 20:49, Davidogilvie said: I have one on order but will take few days...was hoping to still get out on it until new one arrives. Found out that the honda nc750x dct side stand assembly switch if broken or faulty...easy temporary fix...remove it completly from stand...cut it near switch and there is only 2 wires...cut enough to twist together...until your home or able to replace it... Link to post
Iain Cameron 0 Posted September 22, 2021 Share Posted September 22, 2021 Hi all - made is mistake, bought a NC750S stand for my full size NC750X anybody interested in a swap? Link to post
kayz1 2,928 Posted September 22, 2021 Share Posted September 22, 2021 24 minutes ago, Iain Cameron said: Hi all - made is mistake, bought a NC750S stand for my full size NC750X anybody interested in a swap? Replied to the other post. Link to post
Iain Cameron 0 Posted September 22, 2021 Share Posted September 22, 2021 3 minutes ago, kayz1 said: Replied to the other post. Seen Link to post
Bessdogs 27 Posted September 22, 2021 Share Posted September 22, 2021 I’ve got a S side stand and 30 mm lowering links for sale if interested Link to post
Davidogilvie 3 Posted September 26, 2021 Share Posted September 26, 2021 Hi i would be interested in the side stand...how much....i have already lowerd the back dog bones with 30mm... Link to post
Davidogilvie 3 Posted September 26, 2021 Share Posted September 26, 2021 On 28/05/2019 at 23:36, jakeyboy2506 said: Can anyone help. I lowered my NC750X by 40mm but now the side stand is too long. If the side stand switch is removed to allow for an after market adjustable side stand, can the two wires be connected to bypass the switch? Will this have any affect with the dct gear box selector switch or do I need to do something else? Thanks in advance The side switch assy...can be removed..there are 2 wire that can be connected and wont affect the bike at all Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now