Aussie 2 Posted December 30, 2020 Share Posted December 30, 2020 I've got a real puzzler, I had to break suddenly and gave a driver a blast of my horn just pulling into my work places carpark.. Thats when it all happened, I noticed that my instrument panel had gone dead the HISS security system came on but the engine kept running up until I parked it. I tried to start the bike up again. All I'm getting is a strange ticking sound from the engine for about 20secs. The lights come on but nothing else works the horn, indicators, the starter button all dead. I'm thinking a fuse or relay switch ๐ค Any ideas on my personal nightmare? Link to post
wjvh 999 Posted December 30, 2020 Share Posted December 30, 2020 Reckon it's the 30-amp fuse in the starter solenoid. Perhaps when you used the horn it caused too much amperage draw and blew the fuse. The fusesย cost pennies (or cents). The clicking noise you hear is the relay in the solenoid activating, but if the fuse is gone then the electrons won't flow any further. Hopefully that's it ... Link to post
Defender 3,837 Posted December 30, 2020 Share Posted December 30, 2020 Kill switch or side stand switch might to blame? Link to post
Graham 3,177 Posted December 30, 2020 Share Posted December 30, 2020 (edited) Replace the 30 amp fuse. It is beside the battery on the right side, attached to the starter relay from recent memory. I hope nothing has melted so check it. Good luck.ย Edited December 30, 2020 by Graham Link to post
Aussie 2 Posted December 31, 2020 Author Share Posted December 31, 2020 Solved.. The Horn/Instrument fuse.. but now its stuck in 2nd gear and still making a clunking sound and of course won't start. I tried the clutch reset code, nope ๐.. Solved.. In frustration I called my local Honda dealership had a chat to one of their mechanics. He went on about well have to see it to figure out what was wrong with it because of the computer hadn't engaged the clutch ๐ฐ๐ธ.. In other words the clutch was stuck.. ๐คจ๐ค While still on the phone I moved the back wheel back & forth.. There was a CLICK sound.. The clutch had engaged.. The engine started ๐๐ป The question is now is why did this happen? Frayed wiring? Faulty horn switch? ๐ค 2 Link to post
wjvh 999 Posted December 31, 2020 Share Posted December 31, 2020 Did you hold the horn down for a long time? What Amp rating is the fuse? You could fit a higher rated fuse but caution is that the wiring and components areย designed for a certain amperage ... albeit with a healthy margin. Link to post
MatBin 5,100 Posted December 31, 2020 Share Posted December 31, 2020 4 hours ago, Aussie said: Solved.. The Horn/Instrument fuse.. but now its stuck in 2nd gear and still making a clunking sound and of course won't start. I tried the clutch reset code, nope ๐.. Solved.. In frustration I called my local Honda dealership had a chat to one of their mechanics. He went on about well have to see it to figure out what was wrong with it because of the computer hadn't engaged the clutch ๐ฐ๐ธ.. In other words the clutch was stuck.. ๐คจ๐ค While still on the phone I moved the back wheel back & forth.. There was a CLICK sound.. The clutch had engaged.. The engine started ๐๐ป The question is now is why did this happen? Frayed wiring? Faulty horn switch? ๐ค I have a Honda civic CVT car, if I brake hard and come to a stop it seems as if the box/system needs a second or two to settle before I can drive off, I wonder if the bikes have a similar issue? Having said that I have done an emergency stop on the bike (dct) without any issues, maybe yours is a one off, but blowing a fuse sounds a bit odd, is it a standard hooter or after market one? Link to post
Defender 3,837 Posted December 31, 2020 Share Posted December 31, 2020 (edited) 1 hour ago, MatBin said: I have a Honda civic CVT car, if I brake hard and come to a stop it seems as if the box/system needs a second or two to settle before I can drive off, I wonder if the bikes have a similar issue? Having said that I have done an emergency stop on the bike (dct) without any issues, maybe yours is a one off, but blowing a fuse sounds a bit odd, is it a standard hooter or after market one? That's interesting, I too had a Honda car with CVT, but I never noticed the phenomenon you encountered. ย ย ย Edited December 31, 2020 by Defender correction Link to post
Defender 3,837 Posted December 31, 2020 Share Posted December 31, 2020 6 hours ago, Aussie said: Solved.. The Horn/Instrument fuse.. but now its stuck in 2nd gear and still making a clunking sound and of course won't start. I tried the clutch reset code, nope ๐.. Solved.. In frustration I called my local Honda dealership had a chat to one of their mechanics. He went on about well have to see it to figure out what was wrong with it because of the computer hadn't engaged the clutch ๐ฐ๐ธ.. In other words the clutch was stuck.. ๐คจ๐ค While still on the phone I moved the back wheel back & forth.. There was a CLICK sound.. The clutch had engaged.. The engine started ๐๐ป The question is now is why did this happen? Frayed wiring? Faulty horn switch? I do have a non standard horn on my NC'X and it probably draws more current than the standard pathetic fitment, as it makes much more noise, but not had a problem with it blowing the fuse, I would suggest checking the connections for corrosion or a bad joint, also the earthing points starting at the battery, just to be sure. Link to post
MatBin 5,100 Posted December 31, 2020 Share Posted December 31, 2020 2 hours ago, Defender said: That's interesting, I too had a Honda car with CVT, but I never noticed the phenomenon you encountered. ย ย ย Must admit it only happens when I really pile into the brakes to test what would happen in an emergency. Mrs wasn't impressed as her brains kept going forward too ๐ Brakes were impressive though. Link to post
Aussie 2 Posted December 31, 2020 Author Share Posted December 31, 2020 Solved.. The Horn/Instrument fuse.. but now its stuck in 2nd gear and still making a clunking sound and of course won't start. I tried the clutch reset code, nope ๐.. Solved.. In frustration I called my local Honda dealership had a chat to one of their mechanics. He went on about well have to see it to figure out what was wrong with it because of the computer hadn't engaged the clutch ๐ฐ๐ธ.. In other words the clutch was stuck.. ๐คจ๐ค While still on the phone I moved the back wheel back & forth.. There was a CLICK sound.. The clutch had engaged.. The engine started ๐๐ป The question is now is why did this happen? Frayed wiring? Faulty horn switch? ๐ค Link to post
Aussie 2 Posted December 31, 2020 Author Share Posted December 31, 2020 A side note.. When the side stand was down the bike wouldn't start, a safety feature of course. But now it does start with the side stand lowered ๐คจ, interesting ๐ค ย Link to post
MatBin 5,100 Posted December 31, 2020 Share Posted December 31, 2020 3 minutes ago, Aussie said: A side note.. When the side stand was down the bike wouldn't start, a safety feature of course. But now it does start with the side stand lowered ๐คจ, interesting ๐ค ย I thought they started with side stand down so long as in neutral but cut out when you pull in the clutch lever or try to engage a gear on dct bikes? Link to post
Ozzieflyer 15 Posted January 1, 2021 Share Posted January 1, 2021 7 hours ago, MatBin said: I thought they started with side stand down so long as in neutral but cut out when you pull in the clutch lever or try to engage a gear on dct bikes? You are right. ย I have an nc750sa and it starts with the side stand down as long as I am in neutral.ย 1 Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now