Rear NC700x suspension linkage bearings

[blan 5]

Hi all, has anyone replaced any needle roller bearings in the rear suspension linkage on the nc700x ?

I have to replace the 2 lowest bearings (Honda part: 91052-MGS-D31 [needle roller 17x24x30 £17 a pop x2]) and the corresponding Collar (Honda part: 52463-MGS-D10 [Collar B £22 a pop x1])

my question is has anyone found alternative cheaper sources for these parts. I've been to Wemoto but they only sell the bearings (which are currently out of stock) but not the collar, I have found a Koyo needle roller bearing (BHKM1730JU) but not sure if it is right, it does state sizes 17x24x30 but only mentions it is compatible with some Yamaha bikes, has anybody used it for the NC before ?

 

thanks for any info in advance.

 

[Tex 36,816]

I can’t help with your enquiry about cheaper alternatives, sorry, but if you keep the original kit greased it will last for years. I would spring for the Honda parts and add stripping the linkage and re-greasing to the service schedule. Good luck.