Estepona Steve 0 Posted August 16, 2021 Share Posted August 16, 2021 I have a 2020 NC750X and am wanting to get to the accessory plug. I just need some guidance with regards to the first panel (the slim piece held on with just one bolt under the frunk). I am only asking because it's a new bike and I don't want to break anything. I am sure I'll be OK after that has come off. I only have the "old" manual for 700's. thanks in advance. Link to post
SteveM 706 Posted August 16, 2021 Share Posted August 16, 2021 I can let you know Wednesday when I do this for mine Link to post
davebike 943 Posted August 17, 2021 Share Posted August 17, 2021 I just removed on bolt lower on grey pannel and reached in with torch screwdriver and forcepts but I do it for a living and am very lazy ! Link to post
Estepona Steve 0 Posted August 17, 2021 Author Share Posted August 17, 2021 SteveM: Thanks for your reply, I'll look out for your update after Wednesday. davebike: I tried that on my previous 2018 NC750S (on LHS), but the plug was too hard to get to given the limited access. Link to post
MikeBike 5,006 Posted August 17, 2021 Share Posted August 17, 2021 @SteveM @Estepona Steve Have a look at ( download the instructions for the USB socket for your bike model / year at http://cssportal.css-club.net/honda/MCA/TERMS010.aspx which should show you exactly how to remove the bodywork and access the harness socket etc. On my 2015 bike I moved the socketfrom its suggested location up to the left hand fairing at the limit of it's cable so that I could access it by removing just one bolt. 1 Link to post
Estepona Steve 0 Posted August 20, 2021 Author Share Posted August 20, 2021 Hi MikeBike. Sadly that link has long expired. Also, it should be noted that the bodywork on my 2020 is very different to early models. Link to post
Estepona Steve 0 Posted September 22, 2021 Author Share Posted September 22, 2021 Hi SteveM, did you find out how to remove your side panels? Link to post
MikeBike 5,006 Posted September 22, 2021 Share Posted September 22, 2021 (edited) On 20/08/2021 at 08:02, Estepona Steve said: Hi MikeBike. Sadly that link has long expired. Also, it should be noted that the bodywork on my 2020 is very different to early models. THe site works, but for some reason says session expires, you can click the 'Top Page' which takes you back to the URL I posted but it works. Alternatively try the shorter http://cssportal.css-club.net/honda/MCA/ You'll find the instructions for your model and year in there for say USB. EDIT: I've just trie dit and only some models are listed. Think this has happened before and they then reappeared, so keep trying after a day or so Edited September 22, 2021 by MikeBike Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now