Jdpuddy 7 Posted June 30, 2022 Share Posted June 30, 2022 Anyone experienced their indicator switch sticking? Seems to get stuck on occasionally. Any recommendations for lubricant spray (for the switch 😉) Link to post
count von count 118 Posted June 30, 2022 Share Posted June 30, 2022 Interested in the replies. Mine is a bit flaky indicating left, sometimes needs a couple of shoves to get going. And generally feels a bit sticky. Link to post
MatBin 5,075 Posted June 30, 2022 Share Posted June 30, 2022 WD 40 is worth a try, used it on previous bikes. Link to post
RC166 693 Posted June 30, 2022 Share Posted June 30, 2022 I’ve noticed this on a few bikes. I think it’s down to how we press the switch sometimes, rather than just pushing left or right, we may be pressing a bit too much up or down pressure, if that makes sense? 3 Link to post
davebike 943 Posted July 1, 2022 Share Posted July 1, 2022 Mine dose this sometimes I use Wurth's 2040 bit like WD40 so I guess that will wok as well I try to remember to give it a suqart about once a mounth but mine lives outside and is ridden in all weathers and most days Link to post
Gringo 5,050 Posted July 1, 2022 Share Posted July 1, 2022 Only happened a few times on my NC750X. This was in the early days after purchase. I put it down to lack of use after sitting in a showroom. Seems ok now though - I've not squirted any WD40 in there though...yet. Link to post
baben 11,694 Posted July 2, 2022 Share Posted July 2, 2022 I give sticky switches a squirt of electrical contact cleaner stuff - seems to work. Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now