sthapa 0 Posted September 7, 2022 Share Posted September 7, 2022 Hi all Recently bought a Honda NCT 2015 DCT. Decent condition, however when I am starting my journey the bike suddenly goes to neutral while i am moving and i cant get it into any gears. Only thing i can do is turn the engine off and on again. I have done a DCT gear reset but no joy. Anyone have any ideas ? Thanks in advance Link to post
davebike 943 Posted September 8, 2022 Share Posted September 8, 2022 Is the Fi light up ?? If so read the code If not it is possiable the shipter pin in the gearbox has snapped Caused I think by riders turning the engine off in gear which seens to load the pin Pin is about £15 but takes hours to fit it is behing the twin clutch assy Link to post
sthapa 0 Posted September 21, 2022 Author Share Posted September 21, 2022 Sorry for delay in getting back. I had given the bike back to garage. They tried to replicate issue and could only do it once for a whole week of short journeys. They changed the oil from a 40 to a 30 and insisted that's fixed the issue. When I rode out of the garage within 30 seconds it happened again. Oh well. The bike was sold with a warranty so I'll raise a claim with them Link to post
sthapa 0 Posted September 21, 2022 Author Share Posted September 21, 2022 If the shipter pin has snapped would that mean no gear operation is possible. I can ride the bike ok it's just the start of the journey when I slow down suddenly it cuts out to neutral the engine is still one but I can't shift up or down or even flick to manual. Only a restart solves the issue. Link to post
davebike 943 Posted September 22, 2022 Share Posted September 22, 2022 Shifter pin if brokenn gives odd and intermittant issues the pin holds the "ratchet bit" but it mostly stayes in place of its own accord so works sometimes issues with first and seccond + netural are common I seen bikes the are fine when cold but play up as they get hotter and others that are a pain untill they warm up Sometimes there is a fault code "mechanical fault gear box" but not always! 1 Link to post
sthapa 0 Posted September 22, 2022 Author Share Posted September 22, 2022 Got it. Thanks. I will get it changed Link to post
jeremyr62 2,574 Posted September 22, 2022 Share Posted September 22, 2022 3 hours ago, davebike said: Shifter pin if brokenn gives odd and intermittant issues the pin holds the "ratchet bit" but it mostly stayes in place of its own accord so works sometimes issues with first and seccond + netural are common I seen bikes the are fine when cold but play up as they get hotter and others that are a pain untill they warm up Sometimes there is a fault code "mechanical fault gear box" but not always! I wonder if other DCT bikes are affected the same way with broken shifter pins or just the NC? (looks at his VFR1200 DCT...) Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now