Matt 0 Posted October 21, 2022 Share Posted October 21, 2022 Hi all Bike is NC700x manual 2013 I have an intermittent starting issue where on the odd occasion the bike will just turn over and won’t start. I have a fault code flashing from the engine management light of 8 long flashes and 7 short flashes. I assume this is 8-7 or 87. does anyone have a fault code list that this tally’s up with? Many thanks Link to post
Zalman 3 Posted October 21, 2022 Share Posted October 21, 2022 From "138 2016-2017 NC700 NC750 Service Manual.pdf" DTC 87-1 (EOP SWITCH MALFUNCTION) ( EOP= Engine Oil Pressure sensor ) NOTE: Before starting the inspection, check for loose or poor contact on the combination meter 16P (Gray) connector, EOP switch 1 P (Gray) connector and ECM 33P (Black) connector, then recheck the DTC. ... Link to post
outrunner 4,457 Posted October 21, 2022 Share Posted October 21, 2022 Have a look at Section 4 page 14 here. Andy. 1 Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now