Bradders 0 Posted June 23, 2023 Share Posted June 23, 2023 Hello, I have a 2018 NC750X DCT with less than 4000 miles on the clock and like new. However just went to unlock the seat with the ignition key and cannot get it to open. By turning the ignition key anti-clockwise and pressing down on the barrel at the same the seat should unlock but will not. Have tried pushing down on the seat at the same time as turning the key, but no good. Could anyone help with advise please. Thanks, Derek B Link to post
Alan500 91 Posted June 23, 2023 Share Posted June 23, 2023 Hi, I have a 750S so a different system I think but with mine I sometimes have to push down on one end of the seat at the same time as turning the key, rather than pushing down on it centrally 1 Link to post
Johnnie Mototrans 2,767 Posted June 23, 2023 Share Posted June 23, 2023 Hi Bradders I think your problem is probably the catch holding the seat rather than the key end of things. Turn the key and then wiggle the seat. Pat, push, punch , thump. It should let go. Then, Lubricate both ends. 1 Link to post
Tel 4,712 Posted June 24, 2023 Share Posted June 24, 2023 Once you have it open have a look on YouTube, there's a bloke on there who rigs a string set-up so he can manually open the seat if necessary. Bit of a bodge but practical... 1 Link to post
Skidt 1,316 Posted June 24, 2023 Share Posted June 24, 2023 1 hour ago, Tel said: Once you have it open have a look on YouTube, there's a bloke on there who rigs a string set-up so he can manually open the seat if necessary. Bit of a bodge but practical... I’ve done the same! 👍 1 Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now