Throttle cables.

[FurstyFerret 65]

A little ditty.

 

To get around seemingly impossible throttle adjustment without taking the bar steward apart I came upon:

FLZOSPER Metric Fix Tubing Wrench，Flex-Head Gear Wrench, Ratcheting Fix Combination Wrench Spanner (12mm) https://amzn.eu/d/8hVsCpQ

 

Take that! I said to Honda. 

 

Well, just to let you know that the tool is of pretty good quality from first glance but just slightly too chunky to make the "A" cable adjuster nut.

 

In the end I am starting to realise that despite little victories here and there - just as with the neighbour's cat persistently leaving turds - Honda are looking to have won the war.

Edited November 11, 2023 by FurstyFerret
Luditeism/grammar

[FurstyFerret 65]

Hey guys,

 

Re: adjustment of throtle cables. Noticing that both cables have lock nuts but only the "A" cable (throttle open) has an adjustment nut on the otherside. The "B" cable just seems to have the lock nut.

 

Is this normal? Does the "lock nut on the "B" side serve to tighten also 🤔 or is it looking like une monkey de spanner has left it off?

 

As always any feedback appreciated 🙏