Marek 0 Posted May 6 Share Posted May 6 Hi everyone, A few days ago I noticed that the position light stopped working. The brake light works as it should. I replaced the bulb and still the same problem. I checked the cables from the first plug which is above the rear wheel to the bulb fitting /holder and the cables are ok. How can I check the rest of the wiring? Maybe someone already had such a problem and can help. Best regards. Link to post
Andy131 770 Posted May 6 Share Posted May 6 Looking at the wiring diagram on page 659 there are three wires,Black/Green is ground and goes to junction G which is a lot of grounds clumped together. Black / Blue is positive and comes from Junction B - lots of switched lives. Black is the stop lamp feed. From the wiring diagrams the NC from 2016 has a LED stop / tail light, so this might be useless to you if yours is an earlier machine. Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now