Guest machinman Posted September 2, 2013 Share Posted September 2, 2013 Would some one be so kind to tell me if they have any play in their swing arm when grasped at 6 and 12 o clock when on the centre stand. Thanks in advance guys. Link to post
Guest Todd L. Posted September 2, 2013 Share Posted September 2, 2013 I remember reading in the U.S. forum one time that yes, people were noticing play in the swingarm with low miles. I don't remember the details and I don't visit that forum anymore because I'm sick of reading all the on-line bullying, but I do know that several people noticed it and came to the conclusion a small amount was normal. Never checked mine but anything significant is certainly cause for concern. Link to post
embee 7,288 Posted September 2, 2013 Share Posted September 2, 2013 Just checked, no, nothing at all. Link to post
Guest motorboy Posted September 3, 2013 Share Posted September 3, 2013 The swing arm is set in bearing on both sides so you have to have a little play but if it's like 5mm or so pop the gray covers off the swing arm pivot bolt and check if it's loose if not don't worry about.. Link to post
Guest machinman Posted September 3, 2013 Share Posted September 3, 2013 Thank-you all, il check the bolt torque at the weekend and hopefully be able take a little play out. Thanks again. Link to post
Guest machinman Posted September 8, 2013 Share Posted September 8, 2013 Update time, I removed the grey footrest hangers and sure enough the swinging arm bolt was not torqued sufficently. I have now re-torqued and all play has disappeared. Thanks to all who commented. Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now