trisaki 2,029 Posted January 25, 2015 Share Posted January 25, 2015 Hi guys can someone give me the swing arm spindle torque figure for a nc700x many thanx in advance Link to post
Guest bonekicker Posted January 25, 2015 Share Posted January 25, 2015 Mark hope this is what you want if not the right one please let me know Link to post
embee 7,288 Posted January 25, 2015 Share Posted January 25, 2015 (edited) Swingarm pivot torque is the same as the rear wheel spindle. For info the same nut is used, item 18 here http://www.bike-parts-honda.com/pieces-honda-detail-61063-61063-NC700XAC-2012-F_15-NC+700+X+ABS.html , in fact the spindles look essentially the same, just slightly different lengths. Edited January 25, 2015 by embee Link to post
djsb 493 Posted January 25, 2015 Share Posted January 25, 2015 The required value for the swing arm pivot nut is as follows.(page 18-24 of workshop manual) Torque: 98 N.m (10.0 Kgf.m, 72 lbf.ft) HTH. David. Link to post
trisaki 2,029 Posted January 25, 2015 Author Share Posted January 25, 2015 Thanx guys shows this forum rules ! Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now