Guest happy Posted April 30, 2012 Share Posted April 30, 2012 Oh, this is ACF50. Now I get it. Link to post
Rev Ken 6,331 Posted May 24, 2012 Share Posted May 24, 2012 Lovely! Ordered a can of ACF-50 from that auction site.co.uk since we have no importer of the stuff here in Denmark. Now it got "caught" in customs - since it might have an "illegal" substance in it... Crazy. So now I need to find some other alternative. Grr... How weird! ACF50 is a well known product used widely in many countries - I wonder what their worry is..... Link to post
Guest Nogin Posted May 26, 2012 Share Posted May 26, 2012 Nooooooooooooooooooooooooooooooooooooooooooooo I hate that stuff it just messes the bike up big time. Firstly its a Honda it wont rust like a Suzuki. Secondly don't get ACF anywhere near you brake discs or you'll be paying out for new discs and pads. I've only use it once and never again. I just like to clean the bike on a regular basis, Link to post
Rev Ken 6,331 Posted May 27, 2012 Share Posted May 27, 2012 Nooooooooooooooooooooooooooooooooooooooooooooo I hate that stuff it just messes the bike up big time. Firstly its a Honda it wont rust like a Suzuki. Secondly don't get ACF anywhere near you brake discs or you'll be paying out for new discs and pads. I've only use it once and never again. I just like to clean the bike on a regular basis, Yeeeeeeeeeeeeeeeeees - well I get my bike done 'professionally' every year, and throw a bucket of water at it when I can't see what colour it ought to be. ACF50 does the trick for me - but agree - don't let it get at your discs or pads - but then who would?????? Link to post
Guest Nogin Posted May 27, 2012 Share Posted May 27, 2012 Nooooooooooooooooooooooooooooooooooooooooooooo I hate that stuff it just messes the bike up big time. Firstly its a Honda it wont rust like a Suzuki. Secondly don't get ACF anywhere near you brake discs or you'll be paying out for new discs and pads. I've only use it once and never again. I just like to clean the bike on a regular basis, Yeeeeeeeeeeeeeeeeees - well I get my bike done 'professionally' every year, and throw a bucket of water at it when I can't see what colour it ought to be. ACF50 does the trick for me - but agree - don't let it get at your discs or pads - but then who would?????? My idiot mate coated his bike in it and then went for a spin and binned it because it had no brakes at all. I appreciate it does a good job repelling water, but there are not may things to rust on a modern bike, probably only the swing arm and the forks. I would consider removing the swing arm and getting it powder coated if the rust looks like its going to be that bad. Link to post
Guest gunshot72 Posted June 10, 2012 Share Posted June 10, 2012 Nogin, it's not just for preventing rust. It's protects electrical connections, lubes cables, can be sprayed into the gaps of electricals controls on your bars, protects plastic and rubber hoses. Like all lubes don't get on tyres or brake components. I regularly put some in a spray can connected to my compresser, cover the tyres and discs in cling film and high pressure spray the entire frame, engine and electricals. Link to post
Rocker66 34,436 Posted June 10, 2012 Share Posted June 10, 2012 Nooooooooooooooooooooooooooooooooooooooooooooo I hate that stuff it just messes the bike up big time. Firstly its a Honda it wont rust like a Suzuki. Secondly don't get ACF anywhere near you brake discs or you'll be paying out for new discs and pads. I've only use it once and never again. I just like to clean the bike on a regular basis, Thats ok if you can clean the bike after every winter ride but if like me you often get home from a 12 hour shift + 50 minute ride home at 02:00 then this is not really practical . For me ACF50 rules Link to post
Rev Ken 6,331 Posted June 10, 2012 Share Posted June 10, 2012 Lets face it ACF50 is used to stop corrosion on aircraft, which is a very hostile environment - so I for one am VERY happy to spray it everywhere - except on tyres and brake components of course!! Link to post
Guest Lycan Posted August 19, 2012 Share Posted August 19, 2012 If concerned about contamination of brake discs when spraying, simply wipe discs clean afterwards with a rag/kitchen paper. (rags are best - a good use for old tatty socks etc). I usually use a dab of white spirit on the cloth, then wipe a second time with a clean cloth. Link to post
Rocker66 34,436 Posted August 19, 2012 Share Posted August 19, 2012 I usually cover the brakes before spraying and then wipe them afterwards just to be on the safe side Link to post
Mike5100 2,061 Posted August 19, 2012 Share Posted August 19, 2012 I am a huge fan of ACF50 (in fact my NC700 is being professionally treated with it on Tuesday before it even goes on the road. But I never spray ACF 50 on, as it always ends up too much. So I spray into the lid then use a paintbrush to dab it on to any raw metal (bolt heads in particular). That way you can avoid getting it on brakes, although I have to say that when I used to spray it, I got it on discs and pads quite often and it burns off very quickly - within a couple of applications of the brakes. Mike Link to post
Guest bongo Posted August 19, 2012 Share Posted August 19, 2012 anyone that can't wash or don't want to clean the bike that often... or live in 15 miles radius from the coast or live in a heavily congested areas of city or close to big motorways... or industrial areas ... (wich is almost everywhere in the UK) even if they only ride in the dry and keep the bike under a roof should be using some sort of anticorrosion treatment... and ACF50 is one of the best outhere ... Link to post
Guest turbodieseli4i6 Posted August 19, 2012 Share Posted August 19, 2012 Thanks for posting this AFC-50 thread! I use WD40 a lot for a water displacement and cleaning, but I don't use it as a protectant. I have seen guys use WD too clean firearms and when they pull them they sometimes have surface rust on them. Link to post
Guest Lockon2 Posted August 22, 2012 Share Posted August 22, 2012 Hi Fishmanboy I have been using the Scottoiler 365 for many years now, have it in a 5ltr container and use a small hand spray to apply to bike. It does the same job and puts a film over the bike parts to protect from salt etc, also it not only protects it also neutralises salts that can attack the metals. I ride my bikes all year round and used it on a Harley Ultra Glide a couple of years ago which is not the easiest bike to look after in winter and had no problems with corrosion or furring of any bolts etc, just used the rinse bike down a few times through the winter and reapply the 365. Link to post
ncmf 87 Posted August 22, 2012 Share Posted August 22, 2012 I am hopefull That the paint on the NC will last a little longer than on other bikers I gave mine a clean at 3 k and it came up like new. Probably too early to tell though Link to post
beep 1,227 Posted August 23, 2012 Share Posted August 23, 2012 (edited) I use both ACF and FS365. The ACF stuff seems a bit thicker/stickier and is consequently more difficult to wash off. I'd recommend ACF for the depths of winter, when there is salt on the the road and FS365 if you wash your bike a lot and for the rest of the year. I find the FS365 easier to apply but I suspect (sorry no proof) ACF is better at beating corrosion. I prefer FS365 because I'm a bit lazy Edited August 23, 2012 by beep Link to post
Mike5100 2,061 Posted August 23, 2012 Share Posted August 23, 2012 Steve - there's some great info about AF50 on allyearbiker site. If the blurb can be believed it's a lot easier to apply than you would think because it creeps and you only need a one molecule thick layer to provide complete protection. They told me that they never use the spray cans, preferring instead to have a permanently dampened cloth (in a sealed plastic bag), and they just periodically wipe this over exposed areas. They do of course use a misting spray for their once-a-year treatment. but what goes in their spray system does not seem claggy like the stuff in the cans Mike Link to post
Guest Big Den Posted August 23, 2012 Share Posted August 23, 2012 I ride year round in all weather so I've bought a can of ACF-50. My question is can this spray be used on the entire bike, like the exhaust for example. I know you need to avoid the breaks and discs. Cheers Matt This is great stuff mate. You can use it nearly everywhere but keep away from brake pads, rotors and tyres. Exhaust is fine but it will leave a greasy film on the NC's shiny exhaust surface so will need wiping down. I use ACF50 on all my bikes and I now even buy it in 1 litre containers and apply it with a paint gun and compressor. I do the same pre-winter and just rinse off with water during the winter and touch up any areas that look like they are suffering, they use a salt brine round here in winter and its as good as acid on metal, buy it by the litre and a few cans. Leave it on till the salt has gone then give the bike a good clean with sdoc and under the shite is a new bike again WD will evaporate and the scotoiler stuff is water based so will wash off, i will use the scotoil stuff for a quick fix and same with WD but ACF is in a different league, one of the 2 best products on the market for keeping the bike in top condition the other being S doc100 cleaner which also leaves an anti corrosion film after use. By the way i have an issue with corrosion and rust Link to post
Guest Big Den Posted August 23, 2012 Share Posted August 23, 2012 You dont have to spray it on direct, just spray in a container and use an old paintbrush, lasts a lot longer and less waste Link to post
Guest matt_bex Posted October 3, 2012 Share Posted October 3, 2012 Finally got round to applying to my bike. Bloody messy stuff! But was surprised how new it made the bike look as well as physically looking like a protected layer on the metal. Oh and started it to burn off any excess around the exhaust and I thought it was on fire but only lasted a few minutes. All in all didn't take to long to apply and yes was a bit messy but if it works as well as everyone says then I can handle that. Link to post
Guest Crusty Posted October 4, 2012 Share Posted October 4, 2012 I've booked the all year biker service / treatment for the 20th of this month at the event at Sudbury, in Suffolk. My new bike (which I pick up on saturday ) will have to live outside, albeit under a cover, and be used throughout the year. I thought 60 quid was good value for money, especially as it gets rave reviews for the protection it gives. Link to post
Guest Alien Mind Posted October 4, 2012 Share Posted October 4, 2012 Hey Ian - I'm booked in there too, see you there. Make sure your bike is as dirty as can be, as they do an amazing job of cleaning it too! Link to post
Guest Crusty Posted October 4, 2012 Share Posted October 4, 2012 Excellent! I'm booked in for 9.... Link to post
Guest Alien Mind Posted October 4, 2012 Share Posted October 4, 2012 that's seriously early... I'm at 1.30 so i guess you'll be long gone on a sparkling clean bike and perhaps with some goodies in the no tank.. Link to post
roddy 845 Posted October 5, 2012 Share Posted October 5, 2012 I ride 20,000 miles per year and keep my bike outside so I am quite particular on how I look after my bike and attempt to keep it in as good as condition as possible for what its worth this is what I do: After each ride let it cool down and then cold rinse it off with the hose using a bit of muck off. I use an oil base spray called dp60 as opposed to water based wd40 for general everyday use. ACF50 is the dogs whats its when it comes to keeping corrosion at bay and protecting the bike, its a must have product in my opinion and worth the £14 per can. Keep it off brakes though.Its a brilliant lubricant as well and has a creep effect so gets into all the crooks and crannies Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now