Steve698 11 Posted December 11, 2020 Share Posted December 11, 2020 Is the supplied tool kit with the NC750X supposed to contain a C type spanner to adjust the rear shock preload ? Looking through mine today and it doesn't, if it's not part of the kit is there some other way of getting to and adjusting the rear shock ? It seems pretty inaccessible. Link to post
MatBin 5,102 Posted December 11, 2020 Share Posted December 11, 2020 Part of toolkit and tbh it's not easy with the supplied bit of tin either 1 Link to post
Steve698 11 Posted December 11, 2020 Author Share Posted December 11, 2020 Is there some other tool I can use or make, magic wand maybe. Link to post
davebike 943 Posted December 12, 2020 Share Posted December 12, 2020 C spanner there are maney types good tool shop ! Link to post
Slowboy 20,596 Posted December 12, 2020 Share Posted December 12, 2020 10 hours ago, Steve698 said: Is the supplied tool kit with the NC750X supposed to contain a C type spanner to adjust the rear shock preload ? Looking through mine today and it doesn't, if it's not part of the kit is there some other way of getting to and adjusting the rear shock ? It seems pretty inaccessible. I would drop the shock out (assuming you’ve got a centre stand), do the adjustment on the bench and slip it back in. Sounds worse than it is but it’s quicker and easier in the long run. And you can take the opportunity to grease up the suspension joints. 3 Link to post
skorpion 945 Posted December 12, 2020 Share Posted December 12, 2020 You could just take the bike down to any motorcycle dealer and see if they have one that fits. 1 Link to post
MatBin 5,102 Posted December 12, 2020 Share Posted December 12, 2020 Plenty on the bay, some are adjustable too and look a damn sight easier to use than the crap one in the supplied toolkit. Think I might order one for myself. Link to post
NC750 CAN 20 Posted August 25, 2022 Share Posted August 25, 2022 On 12/12/2020 at 04:18, slowboy said: I would drop the shock out (assuming you’ve got a centre stand), do the adjustment on the bench and slip it back in. Sounds worse than it is but it’s quicker and easier in the long run. And you can take the opportunity to grease up the suspension joints. Say what? Surely you jest! That advice is like saying remove the engine, it’s easier when changing the spark plugs. Your reply is why people should always buy a maintenance manual, and not solely rely on advice on a forum. 1 Link to post
Foxy 4,404 Posted August 25, 2022 Share Posted August 25, 2022 Take no notice Brian, your experience and help is valued on here. 2 Link to post
skorpion 945 Posted August 25, 2022 Share Posted August 25, 2022 3 hours ago, NC750 CAN said: Say what? Surely you jest! That advice is like saying remove the engine, it’s easier when changing the spark plugs. Your reply is why people should always buy a maintenance manual, and not solely rely on advice on a forum. Removing the rear shock was the only way to adjust on a 2008 Kawasaki ZZR600, though not on a NC750. 1 1 Link to post
jeremyr62 2,580 Posted August 25, 2022 Share Posted August 25, 2022 Yeah, taking out the shock to adjust it is no big deal. I am swapping shocks all the time and to get the Tuono shock into the Integra swingarm I have fitted to my S, the swingarm has to come out. It's like everything. you get used to it. Remote preload adjusters just add weight. 1 1 Link to post
NC750 CAN 20 Posted August 25, 2022 Share Posted August 25, 2022 1 hour ago, Foxy said: Take no notice Brian, your experience and help is valued on here. Take notice Brian. Not everyone may have your experience, and to suggest what you did, when all you need is an appropriate ring wrench, is cavalier and not too helpful. Link to post
NC750 CAN 20 Posted August 25, 2022 Share Posted August 25, 2022 1 hour ago, skorpion said: Removing the rear shock was the only way to adjust on a 2008 Kawasaki ZZR600, though not on a NC750. I’ve never heard of having to remove a shock just to adjust the preload. This site seems to confirm that in regards to the zzr600. https://www.bikechatforums.com/viewtopic.php?t=71530 Link to post
NC750 CAN 20 Posted August 25, 2022 Share Posted August 25, 2022 10 minutes ago, jeremyr62 said: Yeah, taking out the shock to adjust it is no big deal. I am swapping shocks all the time and to get the Tuono shock into the Integra swingarm I have fitted to my S, the swingarm has to come out. It's like everything. you get used to it. Remote preload adjusters just add weight. I just think using the appropriate c scanner makes more sense. But then again I do take off my wheels and transport them to the gas station when I want to put air in the tires. As you say, you just get used to it. Link to post
jeremyr62 2,580 Posted August 25, 2022 Share Posted August 25, 2022 Well I did try to adjust the preload on a 2016 NC750S shock. It was not easy and despite having a range of C spanners, none of them fitted particularly well. After skinning plenty of knuckles, I resorted to a drift and a big hammer. On the S it's two castellated adjusters. On the X it's a staircase type I think. Taking it out is the easier and less damaging option in my opinion. 1 Link to post
Slowboy 20,596 Posted August 25, 2022 Share Posted August 25, 2022 2 hours ago, Foxy said: Take no notice Brian, your experience and help is valued on here. Way to resurrect an old post 😂😂 And no, not bothered, my post was based on actual experience then, and not just with an NC. The court Jester😂😂😂 1 Link to post
Slowboy 20,596 Posted August 25, 2022 Share Posted August 25, 2022 (edited) 46 minutes ago, NC750 CAN said: Take notice Brian. Not everyone may have your experience, and to suggest what you did, when all you need is an appropriate ring wrench, is cavalier and not too helpful. Been building, riding and occasionally professionally spannering for 30 odd years. But you crack on with your ring wrench, we all have our own way of doing stuff.😁😜 Edited August 25, 2022 by slowboy 1 Link to post
NC750 CAN 20 Posted August 25, 2022 Share Posted August 25, 2022 1 hour ago, jeremyr62 said: Well I did try to adjust the preload on a 2016 NC750S shock. It was not easy and despite having a range of C spanners, none of them fitted particularly well. After skinning plenty of knuckles, I resorted to a drift and a big hammer. On the S it's two castellated adjusters. On the X it's a staircase type I think. Taking it out is the easier and less damaging option in my opinion. My kit didn’t come with a c spanner on my 2021. So I used the one I kept from my gsx-s1000f. It slipped off a couple of times but I got it done in less than a minute. Somehow I don’t think removing and reinstalling the shock is quicker. Link to post
sandalfarm 2,767 Posted August 25, 2022 Share Posted August 25, 2022 I adjusted the shock on my nc and it made no difference to the cheap nasty thing , perhaps if it had a decent one it might have been different Link to post
NC750 CAN 20 Posted August 25, 2022 Share Posted August 25, 2022 3 hours ago, slowboy said: Been building, riding and occasionally professionally spannering for 30 odd years. But you crack on with your ring wrench, we all have our own way of doing stuff.😁😜 I guess that’s why “professional” spannerers charge so much to do a simple thing like use a c spanner. They charge for a couple of hours labour removing and then reinstalling a rear shock. 😉:) 1 Link to post
outrunner 4,457 Posted August 26, 2022 Share Posted August 26, 2022 I have a Hagon rear shock on my NCX and they advise removing the unit to adjust the pre-load. Taking it off,adjusting it,cleaning and greasing things and refitting takes under 1/2 hour. Andy. 1 Link to post
RoyG 233 Posted August 26, 2022 Share Posted August 26, 2022 Serious question. Unless you are going two up with enough luggage to get to Uzbekistan, what are you hoping to achieve by adjusting the shock? Link to post
RoyG 233 Posted August 26, 2022 Share Posted August 26, 2022 My advice to any new NC owner is that you have an hours horse riding lesson. You can then safely ignore anyone on a forum who tells you that the shock and the seat are medieval torture instruments. 2 Link to post
NC750 CAN 20 Posted August 26, 2022 Share Posted August 26, 2022 (edited) 6 hours ago, outrunner said: I have a Hagon rear shock on my NCX and they advise removing the unit to adjust the pre-load. Taking it off,adjusting it,cleaning and greasing things and refitting takes under 1/2 hour. Andy. Really? You must be another professional spannerer. Try a c spanner. Takes me less than 30 seconds. But, seeing as it takes you “only” 30 minutes to remove, clean, grease and refit, by all means do a video and show your skills. I for one am interested. On my last gsxr1000 I could have removed and replaced the rear shock in 30 minutes, but everything is easy to get to, on the 2021 Nc750, no way. Edited August 26, 2022 by NC750 CAN Link to post
Slowboy 20,596 Posted August 26, 2022 Share Posted August 26, 2022 note to self must not feed the trolls 😂😂😂😂🤫 4 Link to post
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now